NJ colored epoxy primer china

NJ colored epoxy primer Product Features
Flat film, fast drying, hard film, Wearable, Low temperature curing performance, Excellent water resistance and chemical resistance, good adhesion on various metal substrates, excellent resistance to high and low temperature performance.

NJ colored epoxy primer china

Interior Wall Coatings manufacturers china

The predecessor of Goldenfish group is Shijiazhuang paint factory, it was one of the former Ministry of Interior Wall Coatings manufacturers china of key enterprises. The factory was founded in 1956, and restructured in 1994 and now it is a large joint-stock cooperative enterprises,.It is one of China coatings industry Hundred year Hundred strong enterprises, it is one of China coating industry hundred years the influence of enterprise.

Interior Wall Coatings manufacturers

All colors of Alkyd primer

Construction Method
Spraying, brush, roller
Use Note

The surface must be dry, clean and the temperature is higher than the dew point temperature of 3 ℃ or more; must use supporting special diluent dilution; during application & drying period, the relative humidity should be less 75%; recoating before the previous film 100% dry, if the coating interval is a long time, before painted it’s necessary to polish the surface.

Exterior latex paint manufacturers

Are you looking for the Exterior latex paint manufacturers with high quality and good service?

添加图片说明

Exterior latex paint Use Note
1. Before painting, the wall should be clean, dry, solid, no ups and downs, no crisp and greasy;
2. Wall to be painted water content should be ≤ 10%, PH <10 before painting, otherwise coating film will be easy to fall off, whitening or decolorization powder off phenomenon may happen;
3. Should be fully stirred before using, brushing at least twice, overcoating interval time not less than 4 hours (25 ℃), working humidity ≤ 85%, the working temperature not less than 5 ℃;

Exterior latex paint supplier

Exterior latex paint

Exterior latex paint Use Note

1. Before painting, the wall should be clean, dry, solid, no ups and downs, no crisp and greasy;

2. Wall to be painted water content should be ≤ 10%, PH <10 before painting, otherwise coating film will be easy to fall off, whitening or decolorization powder off phenomenon may happen;

3. Should be fully stirred before using, brushing at least twice, overcoating interval time not less than 4 hours (25 ℃), working humidity ≤ 85%, the working temperature not less than 5 ℃;

4. Should be fully stirred before using, according to the site temperature, humidity, to choose the ratio of thinning to suit the different requirements of the application methods;

Exterior latex paint supplier

Water-based fluorocarbon exterior latex paint

Use Note

1. Before painting, the wall should be clean, dry, solid, no ups and downs, no crisp and greasy;

2. Wall to be painted water content should be ≤ 10%, PH <10 before painting, otherwise coating film will be easy to fall off, whitening or decolorization powder off phenomenon may happen;

3. Should be fully stirred before using, brushing at least twice, overcoating interval time not less than 4 hours (25 ℃), working humidity ≤ 85%, the working temperature not less than 5 ℃;

4. Should be fully stirred before using, according to the site temperature, humidity, to choose the ratio of thinning to suit the different requirements of the application methods;

5. Latex paint should avoid organic solvent contamination;

Water-based fluorocarbon exterior latex paint

water-in-water multi-color paint factory

Are you looking for the water-in-water multi-color paint factory china?

water-in-water multi-color paint Use Note

1. Before painting, the wall should be clean, dry, solid, no ups and downs, no crisp and greasy;

2. Wall to be painted water content should be ≤ 10%, PH <10 before painting, otherwise coating film will be easy to fall off, whitening or decolorization powder off phenomenon may happen;

3. Should be fully stirred before using, brushing at least twice, overcoating interval time not less than 4 hours (25 ℃), working humidity ≤ 85%, the working temperature not less than 5 ℃;

water-in-water multi-color paint

interior wall latex paint price

Are you looking for the properly interior wall latex paint price online?

We are the interior wall latex paint manufacturers with high quality and good price for many years.

interior wall latex paint Use Note

1.Before painting, the wall should be clean, dry, solid, no ups and downs, no crisp and greasy;

2. The new plaster walls are available to work only when the moisture content is less than 10% and the pH is less than 10.

3. Mold breeding wall, need to be pre-cleared, until the wall is dry and then painting.

4. Interior wall putty should not be soften and swell when meet water and don’t have powder if touched by hand.

5. When putty is dry, polished it smoothly with fine sandpaper, and clean it with a wet cloth, and painting as soon as possible.

6. The paint should be fully mixed before painting so as not to affect the paint function.

interior wall latex paint price